Xhorse VVDI Key Tool Plus Pad

  New positive feedback of   xhorse vvdi key tool plus   pad. It has successfully coded a 2020 Ford Transit ID49 Hitag Pro using   Xhorse MQB smart remote .   Procedure: 1. Generate ID49 remote with  vvdi mini key tool  using MQB smart remote under this option (Transit 2016+ ID49 433) 2. Program smart key with key tool plus. Menu path: Ford – China- model selection – Transit – Add key – Ignition on. 1% password is being read, wait patiently, it takes 4-5 minutes on average. If failed to read password, turn on ignition and repeat from the beginning. As soon as it starts, the password could not be deciphered Err – 15, it gave the error again, I switched the ignition off and open the device, I remove the OBD. Starts again, it reads from 1% to 100%. Then turn on ignition with the key to be programmed, coding ok. Then add more keys. Also did a Transit 2018 with Xhorse key as well.

  How-to: program Land Rover Discovery 2016 key (id49 chip) with xhorse vvdi key tool plus without removing the unit in 2 minutes. The procedure can be applied to other Land rover models from year 2015 to 2018.   Tool used: Xhorse vvdi key tool plus  tablet Xhorse XS version smart key (here we use  XSCS00EN  proximity) Original key   Procedure: Go to Immo Programming->Land rover->Land rover (2015-2018)->OBD Matching without disassembly-> Smart key adding/All key lost Add key will not delete the programmed key. All keys lost will delete all original keys (Supports disabled keys). The deleted key need to be programmed again before it can be used. Put an original key that can start the car into the  vvdi key tool plus  coil Select the location with key ID to write start key. The location without key ID cannot be used to write start key. Insert xhorse XS smart key pcb into coil Select an position with key ID to write key Then follow k...

  How to use   Xhorse VVDI Key Tool Plus   to add a key for 2005 BMW E90 320D CAS2 by OBD? Following the steps below to learn.   Plug connector into OBD2 port, IMMO Programming >> Europe >> BMW >> Automatically diagnose models >> Start programming   The current system type is detected as CAS2, About to enter the system operation interface, please …   Read key information >> Yes Insert the ignition key into ignition switch and connect the vehicle and device well. Press “Yes” to continue.   The dealer key should be taken away from ignition switch. If key is keyless, please move it out of car. If there’s no key in ignition, continue anyway. Press “OK”. Save data file. Prepare dealer key with programmer >> Select a blank key position: Key4 Please put new key into  VVDI Key Tool Plus programmer . Is the current key the smart key? No Key make okay and locked. Please use it start the car. If cannot start engine, use “A...