Xhorse VVDI Key Tool Plus Pad

It’s a 2025 Toyota Alphard Korean version. Added a spare smart key with Xhorse vvdi key tool plus successfully. Board version: 0070   Tools used: Xhorse VVDI Key Tool Plus  Xhorse XM38 Toyota smart key Xhorse Toyota BA AKL cable   Smart box location:   Under the instrument panel on the driver’s side. Need to connect the BA AKL cable to smart box to bypass gateway. Connection steps: Connect the BA all-key-lost adapter Insert the BA wiring harness into the J3 connector Connect the J2 connector to the OBD socket. Connect the J1 connector to the key tool plus device. Step 1:   Back up immo data Menu path: Select from type- Type 4 8A-P4 BA/B8 option Note: Keep the network connection stable while backing up data. The backup process takes approximately 3–5 minutes. Step 2:   Generate the XM38 remote to a corresponding remote program Step 3:   Add smart key  

  This guide walks through the steps of programming an Xhorse smart key to a 2020 Toyota Tacoma using the Xhorse Key Tool Plus and the XM38 Smart Key, starting with one already working key. Tools You’ll Need Xhorse VVDI Key Tool Plus  (with internet connection) Xhorse XM38 Smart Key  (or compatible Xhorse smart key) One existing working key for the Tacoma Step-by-Step Programming Process 1. Identify the Key Type Begin by determining the transponder type of the original key. On the Key Tool Plus, navigate to Transponder Clone. Insert the original key and select Read. Note the type displayed—in this case, Type  A8 . This is essential for key generation. 2. Generate the New Smart Key Return to the main menu and go to Remote Program > Asia > Toyota > Tacoma. Confirm the key type matches (A8). Place the blank Xhorse smart key on the tool’s programming area. Select Generate. Note: An active internet connection is required for this step. Once completed, confirm and...

  2022- Toyota BZ3 add key and all keys lost cannot be done via OBD. Here is the tip to program key for BZ3 with Xhorse tools.   Tools used: Xhorse VVDI Key Tool Plus XDNP10 eeprom adapter Xhorse XM38 smart key    Immo data is stored in the BCM module. We have to remove the BCM module under the dashboard on the driver side. Be careful when removing the module. Disassemble the BCM module. Locate the eeprom chip 25640. Desolder the chip and solder it to XDNP10 eeprom adapter. Go to IMMO Programming- Toyota- Select by vehicle- BZ3- 2022 onwards- Smart key system (46). Back up eeprom data. Then write key using Xhorse XM38 smart key.  http://blog.vvdishop.com/program-2022-toyota-bz3-smart-key-with-xhorse-vvdi-key-tool-plus/

  This is a tutorial on how to add a 2019 Peugeot 3008 proximity key with Xhorse VVDI Key Tool Plus by OBD. Please learn the procedure below step by step.   Tools Required Xhorse VVDI Key Tool Plus XM38 Smart Key  or  XZPG00EN Special Smart Key for Peugeot Citroen DS  Battery Maintainer   Use a maintainer to keep the battery stable. Connect VVDI Key Tool Plus to the OBD port of the vehicle.   Operation Remote program >> Europe >> Peugeot >> 3008 >> 3008(2016+) Remote FSK ID4A >> Generate Writing data, please wait… Burn success. IMMO programming >> Europe >> Peugeot >> Password reading >> Type 3 CAN(adding) >> Start programming >> Read password Please make sure ignition switch is at OFF status. Switch ignition off and wait for 5s, then switch on, keep repeating this process. Password has been read out. Take note of the password. You’ll need it afterwards. Select by model >> Peugeot ...