Xhorse VVDI Key Tool Plus Pad

Xhorse VVDI Key Tool Plus   failed to read MQB49 5D key data via soldering. It reported an error CLK not connected. But with the   godiag clip adapter   work it means that MCU cable is dead? How to check?   Here is the quick guide to check if key tool plus’s mcu cable is good or not. Connect directly from the DB15 port on the main tablet, and the tool reads successfully; then the issue is with the MCU adapter. If the device is still within the warranty period, please reach out to the seller for a replacement MCU adapter.  

If you’re working on a 2019 Ford Mustang with a smart key system and find yourself in an all keys lost situation—especially with the alarm actively triggered—the process can seem daunting. However, with the Xhorse VVDI Key Tool Plus (KTP) and the appropriate Ford AKL (All Keys Lost) cable, you can successfully program a new key and disable the alarm.   What You’ll Need Xhorse VVDI Key Tool Plus XDFAKLGL Ford AKL smart key programming cable New, uncut Ford smart key Jumper cables (if the vehicle battery is low)   Step 1: Prepare the Vehicle Confirm the alarm is active – In an all-keys-lost scenario, the vehicle’s factory alarm is often triggered and will sound or flash lights. Close all doors – Make sure every door is completely shut. The programming sequence requires the vehicle to be in a stable state. Place the new key in the slot – Even though it’s an AKL situation, the key must be physically present in the interior key slot (usually located inside the center console or glo...

Had a 2012 Audi A7 in with all keys lost. Using the   Xhorse VVDI Key Tool Plus   and   BCM2 Solder-Free Adapter , I read the BCM2 data, obtained sync data, and programmed a new dealer key successfully.   Read BCM2 D-Flash and B-Flash Go to: Prog >> IMMO >> AUDI >> BCM2(D70F3634) >> Adapter-No weld Install the BCM2 Adapter (0711 in this case), connect the BCM2 cable, and supply 12V power to the adapter. Read the D-Flash and P-Flash, then save the file. Read Vehicle Data and Gearbox File Reconnect to the vehicle and connect a battery maintainer. Turn the hazard lights on and switch the ignition on. Immo programming >> Audi >> Get immo data online >> Start programming >> Get vehicle data >> 5 th   BCM2 IMMO system, save the vehicle information file. User-defined requests >> Gearbox >>Read and save the gearbox file. Transfer Files and Obtain Sync Data Transfer all four files from the Key Tool Plus to...