Xhorse VVDI Key Tool Plus Pad

Xhorse VVDI Key Tool Plus   has a new feature to back up eeprom data and generate a universal key to disable active alarm on newer Fords. It does on some Toyota, it reads eeprom to and then on an   XM38   it uses it as emergency, then with another different xm38 will be your “master” key to program in. No Ford AKL adapter is needed. It reads the memory, modifies it and deactivates the alarm using that method. It emulates a stored key like Autel does with their emulator; you just use a universal Xhorse smart key in place of the emulator. Not on all Fords, check device and see if there is such an option.

Program 2022 Volvo XC60 all keys lost with   Xhorse VVDI Key Tool Plus   successfully. Decode lock with Lishi auto pick. Remove CEM module under the instrument on the driver’s side. Disassemble the CEM module and read data with key tool plus. Connect 6 wires on the CEM circuit board. Also requires soldering a 100 ohm resistor on the green wire. After you finish reading the CEM data, it’s best to tidy up all the solder joints. Then program key via CEM dump. Images attached:    

Problem: Xhorse VVDI Key Tool Plus   device has no communication after the software update. “Data communication failed, retry or update firmware”. Any solution? Solution: Follow the steps below to clear the cache. Scroll up on the tablet. Press the Home button. Long press the Xhorse icon. Click   App info . Click   Storage . Hit Clear Cache. Then update the software again.