Skip to main content

Posts

Showing posts from April, 2026

Xhorse Key Tool Plus Program 2025 Toyota Alphard Key with 30-PIN Cable

It’s a 2025 Toyota Alphard Korean version. Added a spare smart key with Xhorse vvdi key tool plus successfully. Board version: 0070   Tools used: Xhorse VVDI Key Tool Plus  Xhorse XM38 Toyota smart key Xhorse Toyota BA AKL cable   Smart box location:   Under the instrument panel on the driver’s side. Need to connect the BA AKL cable to smart box to bypass gateway. Connection steps: Connect the BA all-key-lost adapter Insert the BA wiring harness into the J3 connector Connect the J2 connector to the OBD socket. Connect the J1 connector to the key tool plus device. Step 1:   Back up immo data Menu path: Select from type- Type 4 8A-P4 BA/B8 option Note: Keep the network connection stable while backing up data. The backup process takes approximately 3–5 minutes. Step 2:   Generate the XM38 remote to a corresponding remote program Step 3:   Add smart key  

VVDI Key Key Tool Plus Program 2013 Kia Sorento All Keys Lost

2013 Kia Sorento all keys lost is done by   Xhorse VVDI Key Tool Plus   via OBD. Program VVDI XM38 smart key. Generated 315MHZ smart key (us market). Got pin from vendor. Tricked the smart slot that their is a key and tried programming it and it worked- you have to play with slot a few times till it grabs it . Smart proximity works but obviously it won’t because you can’t stick it in the slot if it’s your first time trying to stick it in.  

Xhorse Key Tool Plus Add 2020 VW Tiguan MQB49 5C Key

MQB49 5C key programming on a 2020 VW Tiguan using   Xhorse VVDI Key Tool Plus . Immo data read successfully from the original key and the dealer key generated using   VVDI XSMQB1EN   remote. Initial key learning done with ignition off and hazards on as per instructions. Both keys learned successfully with 2-2 confirmation on the dash. The original key worked fully, but the VVDI key would not switch the ignition on, although remote functions and ESL unlock worked. After speaking with Xhorse support, they advised repeating the process with ignition on. After doing this, both keys worked perfectly with full ignition and remote function on both remotes. FYI: Solder needle to wake line, will be much easier.