Xhorse VVDI Key Tool Plus Pad

  Hey everyone! I’m a locksmith, and today I’m sharing my experience with the   Xhorse VVDI Key Tool Plus   Tablet – a game-changer in my locksmith toolkit. Before buying, I scoured the internet for a solid review but came up empty-handed. So, I took the plunge, and after a month of heavy use, here’s my no-BS breakdown.   What’s in the Box? First off, the unboxing was pretty satisfying. Here’s what you get: – Thetablet(the brains of the operation). – OBD adapter (essential for vehicle programming). – Super chips case (handy for organization). – German car adapters (with options to buy more). – Charger and extra adapters (always good to have backups). Why I Chose the Key Tool Plus? I was torn between this and the Autel IM608, but the Key Tool Plus won me over for a few reasons: Price: At $1,990, it’s cheaper than the Autel IM608. All-in-one functionality: It does everything – key generation, Super Chip cloning, and even connects to Xhorse cutting machines via Bluetoot...

  How to program a dealer key for Land Rover Discovery 3 CEM all keys lost with   Xhorse VVDI Key Tool Plus ? Below I’m gonna show the procedure.   Read CEM Data After soldering to the CEM let’s continue to program keys. Prog >> IMMO >> LandRover >> DISCOVERY3-CEM >> READ >> Start >> Continue All reading success. Save the file. Generate Transponder Put the VVDI Super Chip into Key Tool Plus coil. Generate Transponder >> ID46(PCF7936) >> New 7936 chip >> Generate Complete. Make Dealer Key Immo data tool >> Land Rover >> Discovery >> Discovery 3 >> Start >> Selected the saved data file >> Selected key number: key 1 >> MAKE DEALER KEY >> VVDI Super chip – Select used position, NO NEED write EEPROM Start make key, please wait… Prepare dealer key success. Now the key can start engine. Done. www.vvdishop.com

  Problem: Tried to program 2022 Nissan Sentra B18 smart key with  xhorse vvdi key tool plus . It asks for a 32-digit rolling code. Where can I get the pin code? Solution: Key tool plus cannot pull pin code for Sentra B18. Need to remove HFM hands free module and read pin from dump. Xhorse multi prog  will read HFM data, but key tool plus cannot decode pin code automatically. Need to send data to xhorse engineer to decode pin code manually.

  Problem: CAS3+ OM23S –  Xhorse vvdi Key tool plus  and  CAS3 solder free adapter  XNDP11- chip crack failed.  Is there any other way, or do I need other tools? Solution: Always use servisol PCB cleaner on boards, leave for 10ins, brush with semi firm brush, then spray again and brush.   Feedback: Solved! Removed clear coat from solder points, now it reads. Just scrap it with a needle etc. Be careful.