Xhorse VVDI Key Tool Plus Pad

  Xhorse vvdi key tool plus read Audi A3 2014 MQB instrument cluster immo data and program all keys lost successfully using the   MQB solder free adapter . That board cannot be done by obd. I cannot enter service Mode because all keys lost. I need the key learn in the car for enter service Mode. Or i can send data of 01 engine and 17 instrument cluster for calc immo data and sync data but isn’t more expensive. If i read the cluster with  vvdi key tool plus  (as in the photos) with the file vvdi send immo data, only pay for the sync file. Program key the work it’s done.   These MQB adapters in my opinion are fast, safe. Works fine.   Processor MCU: D70F3537 Using  XDNP85  solder free adapter. Images attached: www.vvdishop.com If need the whole procedure, check guide here Xhorse VVDI Key Tool Plus Read MQB D70F3537 No Soldering

This is a 2020 Volvo XC90 with all keys lost, so we’re about to program a new key for this car with  Xhorse VVDI Key Tool Plus . Since I’ve already took out the module to get data, following I’ll just program the key directly. Put the new key into car coil slot, it’s right here beside the armrest. Plug VVDI Key Tool Plus into OBD port. Immo programming >> Volvo >> XC90 >> 2015- >> Smart key system >> Start programming >> Read the number of keys   Knob start button: turn Start knob to the right once then release Pushbutton. Start button: press the start button once and then release it. The current number of keys: 3   Press “Add smart keys”. Risk warning: This process need disassemble and read CEM module data, please operate with caution; Some modules(MPC5748G) need external 100ohm resistor, non-professionals do not operate; If the programming process is abnormal, please use original factory special inspection for operation. Click “Yes”. ...

  Problem: I have a  Xhorse vvdi key tool plus  and when I enter the programming option, it stops update it, I go to update and it won’t let me and that error appears. ‘A3 Device No Response’. Any solution? VVDISHOP  Solution: 1. Restart App and change WiFi hotspot and update again. 2. If not working, reset key tool plus tablet to factory setting. 3. If still no luck. there is something wrong with the tablet. Need to send back for repiar.

  Xhorse vvdi key tool plus   new feedback today: add key Porsche Macan 2022 successfully.   Macan still has the old system. Panamera is different. Macan 2022 is old key style. if key used same as up to 2018 so the system will be old as on newer keys chip is different. Macan 2014-2023, Cayenne 2011-2017, Panamera 2010-2016, 911 2013-2018, Boxster/Cayenne 2013-2016, 718 2016-2023 use old key. Cayenne 2018-2023, Panamera 2017-2023, 911(992) 2019-2023, Taycan 2019-2023 use new key.   Note: If it is new style key, depends on the key shape. Left: No Right: Yes

  How-to: Add a spare key to BMW CAS3++ ISTAP using xhorse  vvdi key tool plus   and   Godiag BMW CAS2/CAS3 test platform .   Set up connection as following Insert original key into test platform Select IMMO Programming->BMW->Select from system->CAS3/CAS3+ IMMO System->Key fucntion->Generate key via OBD Read Key information. It is CAS3++ ISTAP Remove dealer key from ignition Select Prepare dealer key with programmer Select unused key potion and prepare dealer key Insert new key into  vvdi key tool plus  programmer The key is not smart key, press NO Make dealer key success Select Add key Write Key success Read new key information New key was programmed successfully. Test the new key. www.vvdishop.com