This is a 2020 Volvo XC90 with all keys lost, so we’re about to program a new key for this car with Xhorse VVDI Key Tool Plus. Since I’ve already took out the module to get data, following I’ll just program the key directly.
Put the new key into car coil slot, it’s right here beside the armrest.
Plug VVDI Key Tool Plus into OBD port.
Immo programming >> Volvo >> XC90 >> 2015- >> Smart key system >> Start programming >> Read the number of keys
Knob start button: turn Start knob to the right once then release Pushbutton.
Start button: press the start button once and then release it.
The current number of keys: 3
Press “Add smart keys”.
Risk warning:
- This process need disassemble and read CEM module data, please operate with caution;
- Some modules(MPC5748G) need external 100ohm resistor, non-professionals do not operate;
- If the programming process is abnormal, please use original factory special inspection for operation.
Click “Yes”.
Whether the CEM data has been read?
Click “OK” to load CEM file.
Knob start button: turn Start knob to the right once then release the Push button.
Start button: press the start button once and then release it.
Place a key to be programmed into the vvdi key tool plus sensing area, take other keys out of the car.
The currently key is matched successfully.
Comments
Post a Comment