How to use Xhorse VVDI Key Tool Plus to add a BMW 320D 2006 CAS2 remote key via OBD successfully in 2 minutes?
- Read & Save Data
Plug the connector into OBD2 port, press
Immo programming >> Europe >> BMW >> Automatically diagnose models >> Start programming >> Read key information
Insert the ignition key into ignition switch and connect the vehicle and device well.
Yes >> Yes
The dealer key should be taken away from ignition switch.
If key is keyless, please move it out of car.
If there’s no key in ignition, continue anyway.
Save >> Save here >> Rename, OK
- Program New Key
Prepare dealer key with programmer >> Select an enable key position:Key 10
Put the new key into VVDI Key Tool Plus programmer.
Is the current key the smart key? No
Key make okay and locked. Please use it to start the car.
If can not start engine, use “Add key” function add the dealer key to CAS system.
If key can start engine, but keyless not working, use “Repair Keyless Key” function.
- Test Key
Test the new key now, it can start the engine, and its remote is workable.
Key adding has done!
BMW 320D 2006 CAS2 remote key adding via Xhorse VVDI Key Tool Plus Pad is successful. Quite easy to be done in 2 minutes.
http://blog.vvdishop.com/xhorse-vvdi-key-tool-plus-adds-bmw-320d-2006-remote/
Comments
Post a Comment