VVDI Key Tool Plus Program 2017 Nissan Versa Key by OBD

Following I’m gonna show how to add a smart key for 2017 Nisscan Versa with Xhorse VVDI Key Tool Plus Pad by OBD. This is a working key and a new key. Before programming, you’ll have to read out the BCM codes.

Read BCM Code

Immo programming >> Asia >> Nissan >> Select from system >> Smart >> 4 digits PIN >> Type 5(no slot – button type) >> Start programming >> Read BCM code

Switch ignition on! Click “OK”.

Body computer number(BCM number) has been read out.

Use the “5-digit BCM code calculation password” function to get the password to match(This function requires online)!

Perform calculate of PIN codes by online?

Note:

This function requires online network computing.
Please keep the network unblocked.

Click “Yes”.

The BCM code and passwords were read out.

Just take a photo to record.

VVDI Key Tool Plus Program 2017 Nissan Versa Key by OBD 2

VVDI Key Tool Plus Program 2017 Nissan Versa Key by OBD 3

VVDI Key Tool Plus Program 2017 Nissan Versa Key by OBD 4

VVDI Key Tool Plus Program 2017 Nissan Versa Key by OBD 5

Program New Key

Program smart key >> Input password

Take all smart key out of the car and click the start button once, turn on the security light(double flash lights).

To match the smart card, the direction lock must be released first(the program is released)

Yes: Automatically release the direction lock and execute the matching function.

No: Directly execute the matching function(used when the direction lock has been released by the program).

Click “No”.

Please follow the step below to complete the matching operation:

Paste the back of the smart key to be matched to the start button, press START button, wait for the immo light to go off, then turn off the ignition switch.
If you add more keys, please repeat step1 & step3. stick the back of the matched smart keys to the start button, and turn off the ignition after starting the car.
If the direction lock does not reset, try to press the start button several times to open and close the driver’s door until the direction lock is reset.

After the matching is completed, verify the key as follows:

Open the door once, press the remote UNLOCK and LOCK button once, start the engine and wait for 5s.

Complete.

VVDI Key Tool Plus Program 2017 Nissan Versa Key by OBD 6

VVDI Key Tool Plus Program 2017 Nissan Versa Key by OBD 7

VVDI Key Tool Plus Program 2017 Nissan Versa Key by OBD 8

VVDI Key Tool Plus Program 2017 Nissan Versa Key by OBD 9

This is using VVDI Key Tool Plus to add 2017 Nisscan Versa key successfully.

www.vvdishop.com

Comments

Where to Get VAG MQB Sync Data for VVDI Key Tool Plus?

New user report: Made MQB Skoda Octavia 2018 all keys lost with xhorse tools. Tested VVDI Prog and VVDI key tool plus read MQB dashboard. Both devices have bought the new VAG MQB license . Without you cannot read the data on dashboard. and you need internet connection when you start to read the dashboard. Because device confirm you have license before start the reading. There is a e-mail that responded fast and asked sync data for there 60$ cost and get data in less then 3min. email address: sync_data_calcu@qq.com I done already few with 100% success. Lifting pin not very dangerous. They answered fast usually I communicate via wechat and there have take time. Same place need to solder if use key tool plus . But key tool plus does not need 1k oom and no extra 12v as vvdi prog. 2019 build year Skoda Superb akl situation made successfully today. same dashboard 160€ and they give you all data what need to make key. Just f...

Read MQB48 RH850 RF701401 Dash by VVDI Key Tool Plus

Another Xhorse RH850 adapter tutorial: how to read VAG MQB NEC35XX RH850 DF701401 dashboard with xhorse vvdi key tool plus and RH850 cable. Procedure: Select Immo Programming>>VW>>Select by Type>>MQB Immo System>>Dashboard-MQB48 (VDO/JCI-NEC35XX Locked)-> Read NEC35XX Chip>>Soldering>>R7F701401 Check wiring diagram Remove components and solder rh850 cable with cluster Connect rh850 cable with key tool plus Read and save immo data Select Get Immo data Upload rh850 DF702401 data save above to calculate immo data Then save immo data Now you can generate dealer key or learn key with the immo data www.vvdishop.com

How to Add Key 2019 VW POLO MQB49/5C by Xhorse VVDI Key Tool Plus

Today 2019 VW POLO MQB49/5C add key success. Used Xhorse vvdi key tool plus pad for the whole process. Add key mqb platform (Johnson cluster and new MQB49/5C type on key tool plus are online. Read data with pad, then sent it for online calculation (cost 1 token – must be charged before). You have to use a token to add a spare key from working key. After 3 minutes I got immo data file which automatically saved into the device. After that you make dealer key (used Xhorse proxy MQB style) and program to the car as usual. Test report from Mr. Hrdina.

Xhorse VVDI Key Tool Plus Pad

Search This Blog