Skip to main content

VVDI Key Tool Plus Program VW Golf 7 MQB48 Key

 Question: What tool is able to program VW Golf 7 MQB48? Can I use Xhorse VVDI Key Tool Max PRO, is it possible?

 

Answer

VVDI Key Tool Max PRO does not support this function. Instead, it’ more recommended to use Xhorse VVDI Key Tool Plus Pad to program VW MQB48 IMMO. Before that, you’ll have to activate VAG MQB48 License and disassemble MQB instrument from vehicle.

 

Apart from programming MQB48 NEC35xx add key and all keys lost, VVDI Key Tool Plus also allows to read immo status, repair mileage and modify immo data. Specific operation steps please refer to the following:

 

Instrument-MQB48(VDO/JCI-NEC35xx lock)

  1. Read instrument information

VVDI Key Tool Plus reads and displays the instrument part number, software and hardware version frame number, and other information.

 

  1. Programmer read files
  • Read NEC35xx chip

Calling programmer function to read NEC35xx chip data.

 

  • Read 95320 EEPROM

Calling programmer function to read 95320 EEPROM chip data.

 

  1. Programmer write file
  • Write to NEC35xx chip

Calling programmer function to write service mode data into NEC35xx chip.

 

  • Write 95320 EEPROM

Calling programmer function to write 95320 EEPROM.

 

  1. Obtaining immo data
  • Load the NEC35xx chip file and EEPROM file read by the programmer(if there is an external EEPROM);
  • Upload a file to the server to obtain immo data and save it. This file can be used to generate keys and learn keys.

 

  1. Generate dealer key-load immo data

Load the saved immo data file to generate dealer keys.

 

  1. Learn key

Learn the generated key to the instrument.

 

  1. Immo status

Read the immo status of the instrument, including the number of keys, whether it is a dealer key, whether it is locked, and whether it has been learned. This can be used to determine whether the generated key is normal.

 

  1. KM repair
  • Load the NEC35xx chip file read by the programmer(if there is an EEPROM file, it is also necessary to load the EEPROM)
  • Upload the file to the server, and then save the service mode file and the modified EEPROM file(if there is an external EEPROM)
  • Call the programmer function to write the service mode file and EEPROM file(if there is an external EEPROM). If the write fails, you can use the <Programmer Write File> function to re-write.

 

  1. Modify immo data
  • First, load the new immo data file, and then load the NEC35xx chip file read by the programmer(If there is an EEPROM file, you also need to load the EEPROM).
  • Upload the file to the server, and then save the service mode file.
  • Call the programmer function to write the service mode file. If the write fails, you can use the <Programmer Write File> function to re-write.

VVDI Key Tool Plus Program VW Golf 7 MQB48 Key 1

VVDI Key Tool Plus Program VW Golf 7 MQB48 Key 2

VVDI Key Tool Plus Program VW Golf 7 MQB48 Key 3

Test report:

add key golf 7 mqb has been programmed by xhorse key tool plus. Johnson control.
MQB48

VVDI Key Tool Plus Program VW Golf 7 MQB48 Key 4

VVDI Key Tool Plus Program VW Golf 7 MQB48 Key 5

VVDI Key Tool Plus Program VW Golf 7 MQB48 Key 6

VVDI Key Tool Plus Program VW Golf 7 MQB48 Key 7

www.vvdishop.com

Labels

Labels:

Comments

Post a Comment

Popular posts from this blog

Where to Get VAG MQB Sync Data for VVDI Key Tool Plus?

  New user report: Made MQB Skoda Octavia 2018 all keys lost with xhorse tools. Tested  VVDI Prog  and  VVDI key tool plus  read MQB dashboard. Both devices have bought the new  VAG MQB license . Without you cannot read the data on dashboard. and you need internet connection when you start to read the dashboard. Because device confirm you have license before start the reading. There is a e-mail that responded fast and asked sync data for there 60$ cost and get data in less then 3min. email address:  sync_data_calcu@qq.com  I done already few with 100% success. Lifting pin not very dangerous. They answered fast usually I communicate via wechat and there have take time. Same place need to solder if use  key tool plus . But key tool plus does not need 1k oom and no extra 12v as vvdi prog. 2019 build year Skoda Superb akl situation made successfully today. same dashboard 160€ and they give you all data what need to make key. Just f...
Post a Comment
Read more

Read MQB48 RH850 RF701401 Dash by VVDI Key Tool Plus

  Another   Xhorse RH850 adapter   tutorial: how to read VAG MQB NEC35XX RH850 DF701401 dashboard with   xhorse vvdi key tool plus   and RH850 cable. Procedure: Select Immo Programming>>VW>>Select by Type>>MQB Immo System>>Dashboard-MQB48 (VDO/JCI-NEC35XX Locked)-> Read NEC35XX Chip>>Soldering>>R7F701401 Check wiring diagram Remove components and solder  rh850 cable  with cluster Connect rh850 cable with key tool plus Read and save immo data Select  Get Immo data Upload rh850 DF702401 data save above to calculate immo data Then save immo data Now you can generate dealer key or learn key with the immo data   www.vvdishop.com
Post a Comment
Read more

Will VVDI Key Tool Plus Program VAG MQB49 Key

  How to program VAG MQB49 key with   xhorse vvdi key tool plus ? This is a frequently asked question. Here’s the clue. Only  Johnson Control instrument is supported by  xhorse . Xhorse key tool plus or vvdi2 will only add key to MQB49 (still need sync data), they cannot do MQB49 all keys lost. 1. Calculate immo data online Try to read immo data with key tool plus, if failed to read immo data (shown as error image below). You need to obtain sync data from 3rd party. 2 Check immo status Display the number of vehicle keys, whether current key is locked and whether is dealer key and other information   3. Generate dealer key Load immo data file to generate dealer key, support generate normal dealer key and OME key (online)   4. Leanr key Learn the new generated key and original key into the car together, keys that are not learned will not be able to start the car.   5. Modify MQB49 key ID
Post a Comment
Read more