Skip to main content

VVDI Key Tool Plus Failed to Read 2008- VW Kessy IMMO Data Solution

 Problem:

It is a 2008 VW Toureg with Kessy module. Weld up and read back-up data with xhorse vvdi key tool plus successfully. But it fails to read immo data. Tried several times. Welding is good.
What could be the problem?

VVDI Key Tool Plus Failed to Read 2008- VW Kessy IMMO Data 1

VVDI Key Tool Plus Failed to Read 2008- VW Kessy IMMO Data 2

VVDI Key Tool Plus Failed to Read 2008- VW Kessy IMMO Data 3

VVDI Key Tool Plus Failed to Read 2008- VW Kessy IMMO Data 4

VVDI Key Tool Plus Failed to Read 2008- VW Kessy IMMO Data 5

Solution:

Don’t have to read immo data from the Programmer menu.

Go through the IMMO menu and loaded the “backup data” you read with the programmer, and it will give the the pin and 7 byte cs code.

Go to this screen and load the data you’ve read.

VVDI Key Tool Plus Failed to Read 2008- VW Kessy IMMO Data 6

Same system as 2008 Porsche Cayenne.

Labels:

Comments

Post a Comment

Popular posts from this blog

Where to Get VAG MQB Sync Data for VVDI Key Tool Plus?

  New user report: Made MQB Skoda Octavia 2018 all keys lost with xhorse tools. Tested  VVDI Prog  and  VVDI key tool plus  read MQB dashboard. Both devices have bought the new  VAG MQB license . Without you cannot read the data on dashboard. and you need internet connection when you start to read the dashboard. Because device confirm you have license before start the reading. There is a e-mail that responded fast and asked sync data for there 60$ cost and get data in less then 3min. email address:  sync_data_calcu@qq.com  I done already few with 100% success. Lifting pin not very dangerous. They answered fast usually I communicate via wechat and there have take time. Same place need to solder if use  key tool plus . But key tool plus does not need 1k oom and no extra 12v as vvdi prog. 2019 build year Skoda Superb akl situation made successfully today. same dashboard 160€ and they give you all data what need to make key. Just f...
Post a Comment
Read more

Read MQB48 RH850 RF701401 Dash by VVDI Key Tool Plus

  Another   Xhorse RH850 adapter   tutorial: how to read VAG MQB NEC35XX RH850 DF701401 dashboard with   xhorse vvdi key tool plus   and RH850 cable. Procedure: Select Immo Programming>>VW>>Select by Type>>MQB Immo System>>Dashboard-MQB48 (VDO/JCI-NEC35XX Locked)-> Read NEC35XX Chip>>Soldering>>R7F701401 Check wiring diagram Remove components and solder  rh850 cable  with cluster Connect rh850 cable with key tool plus Read and save immo data Select  Get Immo data Upload rh850 DF702401 data save above to calculate immo data Then save immo data Now you can generate dealer key or learn key with the immo data   www.vvdishop.com
Post a Comment
Read more

How to Add Key 2019 VW POLO MQB49/5C by Xhorse VVDI Key Tool Plus

  Today 2019 VW POLO MQB49/5C add key success. Used   Xhorse vvdi key tool plus pad   for the whole process. Add key mqb platform (Johnson cluster and new MQB49/5C type on key tool plus are online. Read data with pad, then sent it for online calculation (cost  1 token  – must be charged before). You have to use a token to add a spare key from working key. After 3 minutes I got immo data file which automatically saved into the device. After that you make dealer key (used  Xhorse proxy MQB  style) and program to the car as usual. Test report from Mr.  Hrdina. 
1 comment
Read more