Xhorse VVDI Key Tool Plus Pad

  Audi A4 2013 5th generation immobilizer BCM2 all keys lost programming successfully done by   Xhorse VVDI Key tool Plus   pad.   Read IMMO Data Make Dealer Key Learn Key Step 1. Read IMMO Data IMMO programming->Europe->Audi->Select by Type->5th Generation Immobilizer System Press Start programming Select Read BCM data->Read by OBDII-> Read BCM2 data (OBDII) Insert working key into ignition and switch on before continue If working key is already in car, take out and insert in again (also switch START/STOP button). If lost all working key, open the headlight, and step on the bake before continue. Here lost all keys, open headlight, press the brake pedal, press OK to continue Identify vehicle key information Disconnect BCM module from power for 2-3 seconds and reconnect again. Press OK Read success Save data     Step 2: Make Dealer Key Select Make dealer key Select A4L, Q5 add key or lost all key Press OK to load BCM2 data read in...

  Xhorse VVDI Key Tool Plus Pad   can program Hyundai Venue 2020 ID4A key successfully. As below is the operation step by step.   Prepare a original key & a new smart key. Plug Key Tool Plus connector into OBD2 port, let’s start:   Program Key Immo programming >> Asia >> Hyundai >> Select by type >> Key programming >> Type 9 >> Start programming >> Key programming Turn the ignition switch to ON, press “OK”.   Enter 6-digit password, press “OK”.   Insert the original key and switch ignition on ON. Press “OK”.   Matched successfully. Press “OK” to match next one.   Insert the new smart key and switch ignition on ON. Press “OK”.   Matched successfully. Press “Cancel” to finish.   Program completed! Press “OK”. Program Remote Go back to “Select by type” page, press Remote system >> 16PIN >> Type 2 >> Start programming >> Remote key adaptation Choose OBD2 interface, and tur...

  This is a quick demonstration of how to use   Xhorse VVDI Key Tool Plus   to program 2 keys for Renault Kwid RXL.   Connect Key Tool Plus with OBD, press IMMO programming >> Renault >> Immo system >> India >> Kwid(RXL) >> Begin >> Program keys Switch ignition on, press “OK”.   Record VIN and out code, send them to the makers to query 39-digit incode. Press “OK”.   Input 39-digit code, press “OK”. Switch ignition off and remove the key, press “OK”.   Insert the key and switch ignition on, press “OK”.   Program success, press “OK” to program next one.   Remove key from ignition, insert next key and switch ignition on, press “OK”.   Program success, press “Cancel” to go on next step. Switch ignition off wait for 5 seconds, and switch ignition on again. Press “OK” to complete.   Here we go to test the keys, both can work fine. Done! Using  Xhorse Key Tool Plus  key programmer to add 2 keys...