Skip to main content

Xhorse Key Tool Plus Ford Ecosport (-2017) Add ID83 Key

 How to program a key ID83 for Ford Ecosport (-2017) via Xhorse VVDI Key Tool Plus Pad? Here is a quick demonstration of procedure.

 

Connect VVDI Key Tool Plus with OBD for ready.

 

Program Remote

Put the xhorse universal remote smart key into Key Tool Plus slot, press

Remote program >> Ford >> Ecosport >> Ford keyless go ID4D-83 2274 >> Generate

 

Wait writing data until 100%…

 

Burn success, press “Complete”.

xhorse key tool plus Ford Ecosport 2017 id83 key 1

xhorse key tool plus Ford Ecosport 2017 id83 key 2

xhorse key tool plus Ford Ecosport 2017 id83 key 3

Add a Key

Go back to main page, press

IMMO programming >> Ford >> China market >> Select by model >> Eco sport >> Smart key system >> -2017 >> Start programming >> Add smart key

xhorse key tool plus Ford Ecosport 2017 id83 key 4

xhorse key tool plus Ford Ecosport 2017 id83 key 5

xhorse key tool plus Ford Ecosport 2017 id83 key 6

 

Turn on ignition switch! Press “OK”.

 

Reading the password, it takes some time, please wait…

 

Switch ignition off and wait for 10s, then switch on, press “OK”.

 

Password reading completed.

 

Open then close driver door.

 

After press “OK”, please press UNLOCK button of smart key to be programmed for 1s within 15s.

xhorse key tool plus Ford Ecosport 2017 id83 key 7

xhorse key tool plus Ford Ecosport 2017 id83 key 8

xhorse key tool plus Ford Ecosport 2017 id83 key 9

 

Smart key programmed successfully by xhorse key tool plus, press “OK”.

 

Whether to match IMMO chip? Press “OK” to continue.

 

If the car has a key slot, please insert the key into the key slot.

Otherwise put the key into sensing area inside the armrest box.

Press “OK”.

 

Done!

 

Test the key now, the remote works well.

xhorse key tool plus Ford Ecosport 2017 id83 key 10

xhorse key tool plus Ford Ecosport 2017 id83 key 11

xhorse key tool plus Ford Ecosport 2017 id83 key 12

xhorse key tool plus Ford Ecosport 2017 id83 key 13

 

Using VVDI Key Tool Plus to add a smart key ID83 for Ford Ecosport successfully.

 

https://www.vvdishop.com/

Labels

Labels:

Comments

Post a Comment

Popular posts from this blog

Where to Get VAG MQB Sync Data for VVDI Key Tool Plus?

  New user report: Made MQB Skoda Octavia 2018 all keys lost with xhorse tools. Tested  VVDI Prog  and  VVDI key tool plus  read MQB dashboard. Both devices have bought the new  VAG MQB license . Without you cannot read the data on dashboard. and you need internet connection when you start to read the dashboard. Because device confirm you have license before start the reading. There is a e-mail that responded fast and asked sync data for there 60$ cost and get data in less then 3min. email address:  sync_data_calcu@qq.com  I done already few with 100% success. Lifting pin not very dangerous. They answered fast usually I communicate via wechat and there have take time. Same place need to solder if use  key tool plus . But key tool plus does not need 1k oom and no extra 12v as vvdi prog. 2019 build year Skoda Superb akl situation made successfully today. same dashboard 160€ and they give you all data what need to make key. Just f...
Post a Comment
Read more

Read MQB48 RH850 RF701401 Dash by VVDI Key Tool Plus

  Another   Xhorse RH850 adapter   tutorial: how to read VAG MQB NEC35XX RH850 DF701401 dashboard with   xhorse vvdi key tool plus   and RH850 cable. Procedure: Select Immo Programming>>VW>>Select by Type>>MQB Immo System>>Dashboard-MQB48 (VDO/JCI-NEC35XX Locked)-> Read NEC35XX Chip>>Soldering>>R7F701401 Check wiring diagram Remove components and solder  rh850 cable  with cluster Connect rh850 cable with key tool plus Read and save immo data Select  Get Immo data Upload rh850 DF702401 data save above to calculate immo data Then save immo data Now you can generate dealer key or learn key with the immo data   www.vvdishop.com
Post a Comment
Read more

Will VVDI Key Tool Plus Program VAG MQB49 Key

  How to program VAG MQB49 key with   xhorse vvdi key tool plus ? This is a frequently asked question. Here’s the clue. Only  Johnson Control instrument is supported by  xhorse . Xhorse key tool plus or vvdi2 will only add key to MQB49 (still need sync data), they cannot do MQB49 all keys lost. 1. Calculate immo data online Try to read immo data with key tool plus, if failed to read immo data (shown as error image below). You need to obtain sync data from 3rd party. 2 Check immo status Display the number of vehicle keys, whether current key is locked and whether is dealer key and other information   3. Generate dealer key Load immo data file to generate dealer key, support generate normal dealer key and OME key (online)   4. Leanr key Learn the new generated key and original key into the car together, keys that are not learned will not be able to start the car.   5. Modify MQB49 key ID
Post a Comment
Read more