Program 2021 Ford Bronco All Keys Lost with Xhorse VVDI Key Tool Plus

Xhorse VVDI Key Tool Plus Pad is able to program 2021 Ford Bronco Sport all keys lost via OBD successfully. Following I’m gonna try to add these 2 keys for this vehicle.

Backup P-Flash & D-Flash

Connect VVDI Key Tool Plus with OBD, press

Immo programming >> North America >> Ford >> China market >> Select by model >> Escape >> Smart key system >> 2020- >> Start programming

Follow the instructions:

Open and close driver door once and turn off ignition switch.

OK >> Backup P-Flash

VVDI Key Tool Plus displays a Warning:

Black screen may appear during the execution of this function, which is normal.

Press “Yes” to continue.

It may take about 20 minutes to save P-Flash.

As I have already did, so I just show you the steps and go back.

Press “Backup D-Flash” to save the file as before.

This is just in case everything gets messed up in the system, then you can have your backup.

Program 2021 Ford Bronco All Keys Lost with Xhorse VVDI Key Tool Plus 2

Program 2021 Ford Bronco All Keys Lost with Xhorse VVDI Key Tool Plus 3

Program New Keys

Press “Lost all key” after completing all backups.

Yes >> Select P-Flash >> Open

All keys will be cleared, Press “Yes” to continue.

Note: at least 2 keys are needed to complete the key programming!

Key clearing succeeded!

Current number of keys: 0

Program 2021 Ford Bronco All Keys Lost with Xhorse VVDI Key Tool Plus 4

Program 2021 Ford Bronco All Keys Lost with Xhorse VVDI Key Tool Plus 5

For smart key: place the new key to be programmed into car emergency sensing area and continue.

For flip key: insert the key to be programmed and turn on ignition switch.

Press “OK”.

You’ll hear the locks coming on and off.

Current number of key: 1

Program successfully! Press “Yes” to program next key.

Just repeat same operations as first key.

Current number of keys: 2

Program successfully. Press “No” to complete.

Finally, let’s have a test.

Both keys are workable, done!

Program 2021 Ford Bronco All Keys Lost with Xhorse VVDI Key Tool Plus 6

Program 2021 Ford Bronco All Keys Lost with Xhorse VVDI Key Tool Plus 7

Program 2021 Ford Bronco All Keys Lost with Xhorse VVDI Key Tool Plus 8

Program 2021 Ford Bronco All Keys Lost with Xhorse VVDI Key Tool Plus 9

Using VVDI Key Tool Plus to program 2021 Ford Bronco Sport when all keys lost successfully.

https://www.vvdishop.com/

Comments

Where to Get VAG MQB Sync Data for VVDI Key Tool Plus?

New user report: Made MQB Skoda Octavia 2018 all keys lost with xhorse tools. Tested VVDI Prog and VVDI key tool plus read MQB dashboard. Both devices have bought the new VAG MQB license . Without you cannot read the data on dashboard. and you need internet connection when you start to read the dashboard. Because device confirm you have license before start the reading. There is a e-mail that responded fast and asked sync data for there 60$ cost and get data in less then 3min. email address: sync_data_calcu@qq.com I done already few with 100% success. Lifting pin not very dangerous. They answered fast usually I communicate via wechat and there have take time. Same place need to solder if use key tool plus . But key tool plus does not need 1k oom and no extra 12v as vvdi prog. 2019 build year Skoda Superb akl situation made successfully today. same dashboard 160€ and they give you all data what need to make key. Just f...

Read MQB48 RH850 RF701401 Dash by VVDI Key Tool Plus

Another Xhorse RH850 adapter tutorial: how to read VAG MQB NEC35XX RH850 DF701401 dashboard with xhorse vvdi key tool plus and RH850 cable. Procedure: Select Immo Programming>>VW>>Select by Type>>MQB Immo System>>Dashboard-MQB48 (VDO/JCI-NEC35XX Locked)-> Read NEC35XX Chip>>Soldering>>R7F701401 Check wiring diagram Remove components and solder rh850 cable with cluster Connect rh850 cable with key tool plus Read and save immo data Select Get Immo data Upload rh850 DF702401 data save above to calculate immo data Then save immo data Now you can generate dealer key or learn key with the immo data www.vvdishop.com

Will VVDI Key Tool Plus Program VAG MQB49 Key

How to program VAG MQB49 key with xhorse vvdi key tool plus ? This is a frequently asked question. Here’s the clue. Only Johnson Control instrument is supported by xhorse . Xhorse key tool plus or vvdi2 will only add key to MQB49 (still need sync data), they cannot do MQB49 all keys lost. 1. Calculate immo data online Try to read immo data with key tool plus, if failed to read immo data (shown as error image below). You need to obtain sync data from 3rd party. 2 Check immo status Display the number of vehicle keys, whether current key is locked and whether is dealer key and other information 3. Generate dealer key Load immo data file to generate dealer key, support generate normal dealer key and OME key (online) 4. Leanr key Learn the new generated key and original key into the car together, keys that are not learned will not be able to start the car. 5. Modify MQB49 key ID

Xhorse VVDI Key Tool Plus Pad

Search This Blog