Xhorse VVDI Key Tool Plus is a good tool to successfully add BMW E60 key via OBD in 1 minute. Following I’m gonna show you.
- Read & Save Key Info
Immo programming >> BMW >> Automatically diagnose models >> Read key information
Please insert the key into ignition switch.
Connect the vehicle & key tool plus well.
Press “Yes” to add key.
Confirm key info, press “Yes”.
The dealer key should be taken away from ignition switch.
If key is keyless, please move it out of car.
If there’s no key in ignition, continue anyway.
Press “OK”.
Save key file.
- Program New Key
Prepare dealer key with programmer >> Select a blank key position: Key4
Put new key into Xhorse Key Tool Plus Programmer.
Is the current key a smart key? No
Key make okay and locked. Please use it to start the car.
If cannot start engine, use “Add key” function to add the dealer key to CAS system.
If key can start engine, but keyless not working, please use “Repair keyless key” function.
Press “Add key”.
This function add the newly generated key to IMMO system.
Need to be executed “Generate dealer key – use programmer” function to generate key.
Press “Yes” to continue.
Put new key into Key Tool Plus programmer.
It’s not smart key, press “No”.
The dealer key should be taken away from ignition switch.
If key is keyless, please move it out of car.
If there’s no key in ignition, continue anyway.
Press “OK”.
New dealer key success is written to CAS system.
You can start engine with the new key now. If cant please use the normal working key first.
Test the new key, its remote work well.
Done.
This is how to do BMW E60 key adding with VVDI Key Tool Plus successfully.
Comments
Post a Comment