Today we are going to make this Jeep Wrangler 2020 all keys lost with xhorse vvdi key tool plus. The vehicle has SGW gateway connector. Here is the connector. We use ADC2011 cable to program the key, it is easier than FCA 12+8 bypass cable.
If you can not access here, you come down here and remove that part, to access the connector under the instrument.
First of all, generate smart remote with km100 or xhorse key tool
Press IMMO PROGRAMMING
SELECT JEEP
SELECT BY AREA
SELECT NORTH AMERICAN
SELECT WANGLER
SELECT 2020-2021
SELECT YOUR SMART KEY SYSTEM
Press START PROGRAMMING
press ok
Turn on the hazard lights
Press READ PIN CODE
Press Accept and Accept
Don’t forget to be connected to the internet
now just wait 8-10 minutes to get the password
Don’t be scared if it failed to read pin, try several times.
it took 9 minutes to wait to get the password
press ok
Press CLEAR SMART KEYS
Press Accept and Accept
enter the password and press OK
after deleting all keys
Press ADD SMART KEY
Press Accept and Accept
enter the password and press OK
Press OK and place the key next to the button
will appear on the screen, press 1 x button
after pressing the button it goes from OFF to ACC
you will see 1 programmed key
press ok
press ok
Get out of the system
remove vvdi key tool plus
car started.
Done.
Comments
Post a Comment