Skip to main content

VVDI Key Tool Plus Add 2023 Kia Carnival 4A Smart Key

I’m working on a 2023 Kia Carnival for a customer who has one working key. We sourced a new OEM smart key with sliding door buttons, and I’m using the Xhorse VVDI Key Tool Plus to add it.

VVDI Key Tool Plus Add 2023 Kia Carnival 4A Smart Key 1

  1. Read the Smart Key PIN Code

The Carnival uses a 4A smart key. If you’re unsure about the transponder type, read the key before entering IMMO programming.

  • On the Key Tool Plus, go to Immo Programming >> ASIA >> KIA >> Read PIN Code >> Password reading (ID 4A smart key) >> Start Programming >> Read PIN code.
  • If connected to the network, click OK. With an existing key, switch the ignition OFF and then ON. If all keys are lost, turn on the hazard lights and close the driver’s door once.
  • Click OK and wait for the PIN reading to finish. Switch the ignition OFF when prompted and note the PIN code.

PIN code: 363065

Workshop Note: Hyundai/Kia key programming erases all existing keys and remotes. Ask the customer about additional keys beforehand so they can be added back.

VVDI Key Tool Plus Add 2023 Kia Carnival 4A Smart Key 2

VVDI Key Tool Plus Add 2023 Kia Carnival 4A Smart Key 3

VVDI Key Tool Plus Add 2023 Kia Carnival 4A Smart Key 4

  1. Enter Smart Key Programming
  • Go to Select by model >> US market >> Carnival (KA4) >> 2022- >> Smart keys programming >> Start programming >> Smart keys programming.
  • Enter PIN 363065, then press the Start button once as prompted.
  • Switch the ignition OFF, open and close the driver’s door once, and confirm the network connection if requested.

VVDI Key Tool Plus Add 2023 Kia Carnival 4A Smart Key 5

VVDI Key Tool Plus Add 2023 Kia Carnival 4A Smart Key 6

  1. Match the New Smart Key
  • Within 5 seconds, hold the smart key’s indicator-light end against the Start button for 5 seconds. The immobilizer light will flash during matching. Position the original factory key vertically; for some aftermarket keys, use the back of the key or remove its shell.
  • Once the tool displays “This start key has programmed successfully,” select Yes to program the next key and repeat the matching procedure.
  • After programming all keys, select No to finish.

All smart keys must be matched to the vehicle; an unmatched key cannot start it.

VVDI Key Tool Plus Add 2023 Kia Carnival 4A Smart Key 7

VVDI Key Tool Plus Add 2023 Kia Carnival 4A Smart Key 8

  1. Verify Key Operation

Test both smart keys. Both started the vehicle and worked properly.

VVDI Key Tool Plus Add 2023 Kia Carnival 4A Smart Key 9

www.vvdishop.com

Labels:

Comments

Post a Comment

Popular posts from this blog

Will VVDI Key Tool Plus Program VAG MQB49 Key

  How to program VAG MQB49 key with   xhorse vvdi key tool plus ? This is a frequently asked question. Here’s the clue. Only  Johnson Control instrument is supported by  xhorse . Xhorse key tool plus or vvdi2 will only add key to MQB49 (still need sync data), they cannot do MQB49 all keys lost. 1. Calculate immo data online Try to read immo data with key tool plus, if failed to read immo data (shown as error image below). You need to obtain sync data from 3rd party. 2 Check immo status Display the number of vehicle keys, whether current key is locked and whether is dealer key and other information   3. Generate dealer key Load immo data file to generate dealer key, support generate normal dealer key and OME key (online)   4. Leanr key Learn the new generated key and original key into the car together, keys that are not learned will not be able to start the car.   5. Modify MQB49 key ID
Post a Comment
Read more

How to Add Key 2019 VW POLO MQB49/5C by Xhorse VVDI Key Tool Plus

  Today 2019 VW POLO MQB49/5C add key success. Used   Xhorse vvdi key tool plus pad   for the whole process. Add key mqb platform (Johnson cluster and new MQB49/5C type on key tool plus are online. Read data with pad, then sent it for online calculation (cost  1 token  – must be charged before). You have to use a token to add a spare key from working key. After 3 minutes I got immo data file which automatically saved into the device. After that you make dealer key (used  Xhorse proxy MQB  style) and program to the car as usual. Test report from Mr.  Hrdina. 
1 comment
Read more

Read MQB48 RH850 D70F3426 Dash by VVDI Key Tool Plus

  Xhorse tutorial: how to read VAG MQB48 NEC35XX locked RH850 D70F3426 processor dashboard with   Xhorse vvdi key tool plus   and RH850 cable.   Xhorse XDNPRBGL MQB-RH850/V850 Adapter  is designed to read VW MQB48 dashboard data without cutting/ lifting any pins. Support List: MQB-RH850 (R7F) MQB 34XX IMMO4 JCI 34XX Here take an example of RH850 D70F3426.   D70F3426 cluster is more complex than the regular RH850 cluster. You will need key tool plus, RH850 adapter and eeprom adapter   Procedure: 1.Read dashboard data The function requires network connection. Go to Immo Programming>>VW>>Select by Type>>MQB Immo System>>Dashboard-MQB48 (VDO/JCI-NEC35XX Locked) Then select Read Immo data>>Read NEC35XX Chip>>Soldering>>R7F703426 Check wiring diagram Follow wiring diagram to remove 4 capacitors solder RH850 adapter with cluster, then connect RH850 cable with key tool plus Read and save IMMO D...
Post a Comment
Read more