Skip to main content

Clone Chevy Colorado 48 Chip with Xhorse VVDI Key Tool Plus

 How to use Xhorse VVDI Key Tool Plus to clone Chip 48 online for a Chevrolet Colorado Z71 2009? Here I’ll make a quick demo to show the steps.

 

Tools

A working key

A new blank key with Super Chip XT27A66

Xhorse VVDI Key Tool Plus

Clone Chevy Colorado 48 Chip with Xhorse VVDI Key Tool Plus  1

 

Procedure

Put the working key into Key Tool Plus coil, press

Transponder clone >> Read transponder

 

As you can see, it is a ID48 chip.

It’ll requires 100 points for ID48(96bit) online calculation.

 

Clone >> Start clone

Data collecting… put coil near ignition start and switch on off, then remove key out 8 times.

1 time successful in collect data,

2 time successful in collect data…

Repeat 8 times to finish.

 

Put original working key into Key Tool Plus coil to calculate.

Upload data success.

Clone Chevy Colorado 48 Chip with Xhorse VVDI Key Tool Plus  2

Clone Chevy Colorado 48 Chip with Xhorse VVDI Key Tool Plus  3

Clone Chevy Colorado 48 Chip with Xhorse VVDI Key Tool Plus  4

Wait Xhorse server for calculating…

 

Read original working key success.

The the working out, put Super Chip XT27 into coil.

Cloning successfully.

 

Now put the VVDI Super Chip into new key to have a try.

It can start the engine.

Done!

Clone Chevy Colorado 48 Chip with Xhorse VVDI Key Tool Plus  5

Clone Chevy Colorado 48 Chip with Xhorse VVDI Key Tool Plus  6

Clone Chevy Colorado 48 Chip with Xhorse VVDI Key Tool Plus  7

This is using Xhorse VVDI Key Tool Plus & XT27 Super Chip to clone ID48 for Chevy Colorado  Z71 2009 successfully.

https://www.vvdishop.com/

Comments

Popular posts from this blog

Will VVDI Key Tool Plus Program VAG MQB49 Key

  How to program VAG MQB49 key with   xhorse vvdi key tool plus ? This is a frequently asked question. Here’s the clue. Only  Johnson Control instrument is supported by  xhorse . Xhorse key tool plus or vvdi2 will only add key to MQB49 (still need sync data), they cannot do MQB49 all keys lost. 1. Calculate immo data online Try to read immo data with key tool plus, if failed to read immo data (shown as error image below). You need to obtain sync data from 3rd party. 2 Check immo status Display the number of vehicle keys, whether current key is locked and whether is dealer key and other information   3. Generate dealer key Load immo data file to generate dealer key, support generate normal dealer key and OME key (online)   4. Leanr key Learn the new generated key and original key into the car together, keys that are not learned will not be able to start the car.   5. Modify MQB49 key ID

How to Add Key 2019 VW POLO MQB49/5C by Xhorse VVDI Key Tool Plus

  Today 2019 VW POLO MQB49/5C add key success. Used   Xhorse vvdi key tool plus pad   for the whole process. Add key mqb platform (Johnson cluster and new MQB49/5C type on key tool plus are online. Read data with pad, then sent it for online calculation (cost  1 token  – must be charged before). You have to use a token to add a spare key from working key. After 3 minutes I got immo data file which automatically saved into the device. After that you make dealer key (used  Xhorse proxy MQB  style) and program to the car as usual. Test report from Mr.  Hrdina. 

Read MQB48 RH850 D70F3426 Dash by VVDI Key Tool Plus

  Xhorse tutorial: how to read VAG MQB48 NEC35XX locked RH850 D70F3426 processor dashboard with   Xhorse vvdi key tool plus   and RH850 cable.   Xhorse XDNPRBGL MQB-RH850/V850 Adapter  is designed to read VW MQB48 dashboard data without cutting/ lifting any pins. Support List: MQB-RH850 (R7F) MQB 34XX IMMO4 JCI 34XX Here take an example of RH850 D70F3426.   D70F3426 cluster is more complex than the regular RH850 cluster. You will need key tool plus, RH850 adapter and eeprom adapter   Procedure: 1.Read dashboard data The function requires network connection. Go to Immo Programming>>VW>>Select by Type>>MQB Immo System>>Dashboard-MQB48 (VDO/JCI-NEC35XX Locked) Then select Read Immo data>>Read NEC35XX Chip>>Soldering>>R7F703426 Check wiring diagram Follow wiring diagram to remove 4 capacitors solder RH850 adapter with cluster, then connect RH850 cable with key tool plus Read and save IMMO D...