Skip to main content

Xhorse VVDI Key Tool Plus and Autel IM608 Pro Comparison

 Universal key programmer which is better, IM608 pro or the Xhorse Key Tool Plus pad?

 

Check the simple table comparison below:


ItemAutel IM608 ProXhorse VVDI Key Tool Plus



Ford 2019/2020:

1. Add key,

2. All key lost.

YesNo
GM 2018 up:

Add key, read PIN by OBD

YesNo
Chrysler 2018-2020:

Add key

YesPart Yes
Mercedes Benz:

Add key, all key lost.

3rd IMMO Yes3rd IMMO Yes
BMW:

All key lost & other immo system functions

YesYes
VW:

Add key, all key lost.

YesYes
Toyota:

8A mechanical all key lost

Part support

require emulator

Part support

without emulator

Honda 2019 up:

All key lost

Part YesNo
Hyundai 2018-2021:

  1. Add key;

2. 4A, 8A smart card.

YesPart Yes
China-made: 2020 of some brandsYesNo
KeytoolPart YesYes
EEPROMYesYes

 

Xhorse Key Tool Plus advantages comparing IM608Pro

Better in transporter cloning, remote generation, eeprom function and available to control key cutting machines made by Xhorse.

Can be combined with other xhorse tools.

Xhorse is way better programming Mercedes Benz than Autel (faster online password calculation)

Add a bunch of car brands like Ford, GM, Chrysler etc that does not support before. At present, the vehicle coverage and performance are approximately at a medium level, which is still far from im608 pro, but it is clearly catching up.
Key Tool Plus is good for VAG
Free update online

 

 

 

Autel IM608 Pro advantages:

Full system diagnosis, special service functions and odometer correction functions.

Diagnostic sofwtare is good.
the J2534 programmer is an added source of revenue

Expensive annually subscription

http://blog.vvdishop.com/xhorse-vvdi-key-tool-plus-vs-autel-im608-pro/

Labels:

Comments

  1. Smith RollineNovember 20, 2022 at 8:22 AM

    Thanks for sharing this informative post. I was really looking forward to such blog.
    Porsche coding tool

    ReplyDelete

Post a Comment

Popular posts from this blog

Where to Get VAG MQB Sync Data for VVDI Key Tool Plus?

  New user report: Made MQB Skoda Octavia 2018 all keys lost with xhorse tools. Tested  VVDI Prog  and  VVDI key tool plus  read MQB dashboard. Both devices have bought the new  VAG MQB license . Without you cannot read the data on dashboard. and you need internet connection when you start to read the dashboard. Because device confirm you have license before start the reading. There is a e-mail that responded fast and asked sync data for there 60$ cost and get data in less then 3min. email address:  sync_data_calcu@qq.com  I done already few with 100% success. Lifting pin not very dangerous. They answered fast usually I communicate via wechat and there have take time. Same place need to solder if use  key tool plus . But key tool plus does not need 1k oom and no extra 12v as vvdi prog. 2019 build year Skoda Superb akl situation made successfully today. same dashboard 160€ and they give you all data what need to make key. Just f...
Post a Comment
Read more

Read MQB48 RH850 RF701401 Dash by VVDI Key Tool Plus

  Another   Xhorse RH850 adapter   tutorial: how to read VAG MQB NEC35XX RH850 DF701401 dashboard with   xhorse vvdi key tool plus   and RH850 cable. Procedure: Select Immo Programming>>VW>>Select by Type>>MQB Immo System>>Dashboard-MQB48 (VDO/JCI-NEC35XX Locked)-> Read NEC35XX Chip>>Soldering>>R7F701401 Check wiring diagram Remove components and solder  rh850 cable  with cluster Connect rh850 cable with key tool plus Read and save immo data Select  Get Immo data Upload rh850 DF702401 data save above to calculate immo data Then save immo data Now you can generate dealer key or learn key with the immo data   www.vvdishop.com
Post a Comment
Read more

How to Add Key 2019 VW POLO MQB49/5C by Xhorse VVDI Key Tool Plus

  Today 2019 VW POLO MQB49/5C add key success. Used   Xhorse vvdi key tool plus pad   for the whole process. Add key mqb platform (Johnson cluster and new MQB49/5C type on key tool plus are online. Read data with pad, then sent it for online calculation (cost  1 token  – must be charged before). You have to use a token to add a spare key from working key. After 3 minutes I got immo data file which automatically saved into the device. After that you make dealer key (used  Xhorse proxy MQB  style) and program to the car as usual. Test report from Mr.  Hrdina. 
1 comment
Read more