VVDI Key Tool Plus Adds 2020 Land Rover RFA Key

This is the 2020 Land Rover vehicle information, which has been replaced chip. So I’m gonna use Xhorse VVDI Key Tool Plus to program RFA at first, then add 2 smart keys.

Connect Key Tool Plus Pad into OBD, go to:

Immo programming >> Land Rover >> Land Rover(2018-) >> Smart key system >> Replace RFA(Beta) >> OK >> OK

The program will automatically switch on the ignition, please confirm that the current vehicle ignition is off.

The following process will perform the RFA module data programming function. If the current RFA module has performed a complete data programming, you can skip this process. Click “OK” to perform the data programming function, click “Cancel” to identify enter the key matching process without performing the data programming function.

Press “OK”.

VVDI Key Tool Plus is configuring the system, wait until 100%…

RFA module data programming is completed. If you need to try to match the key multiple times, you can skip the RFA module data programming and directly execute the key matching process.

VVDI Key Tool Plus Adds 2020 Land Rover RFA Key 2

VVDI Key Tool Plus Adds 2020 Land Rover RFA Key 3

VVDI Key Tool Plus Adds 2020 Land Rover RFA Key 4

VVDI Key Tool Plus Adds 2020 Land Rover RFA Key 5

The Xhorse key tool plus program will automatically switch on the ignition, please confirm that the current vehicle ignition is off.

Please prepare at least 2 keys that need to be matched, and the keys need to be placed in the car. During the matching process, you need to press the unlock button. After clicking “OK”, start matching keys according to the operation prompts. Please complete all keys within 30s.

Please take the matching smart key in your hand.

Press the unlock key for 4s, and the born sounds twice, which means the matching is successful.

Programmed successfully.

Press “Yes” to program next one, otherwise press “No”.

2 keys have been added, go ahead to have a test.

Both can work normally.

Done.

VVDI Key Tool Plus Adds 2020 Land Rover RFA Key 6

VVDI Key Tool Plus Adds 2020 Land Rover RFA Key 7

VVDI Key Tool Plus Adds 2020 Land Rover RFA Key 8

www.vvdishop.com

Comments

Where to Get VAG MQB Sync Data for VVDI Key Tool Plus?

New user report: Made MQB Skoda Octavia 2018 all keys lost with xhorse tools. Tested VVDI Prog and VVDI key tool plus read MQB dashboard. Both devices have bought the new VAG MQB license . Without you cannot read the data on dashboard. and you need internet connection when you start to read the dashboard. Because device confirm you have license before start the reading. There is a e-mail that responded fast and asked sync data for there 60$ cost and get data in less then 3min. email address: sync_data_calcu@qq.com I done already few with 100% success. Lifting pin not very dangerous. They answered fast usually I communicate via wechat and there have take time. Same place need to solder if use key tool plus . But key tool plus does not need 1k oom and no extra 12v as vvdi prog. 2019 build year Skoda Superb akl situation made successfully today. same dashboard 160€ and they give you all data what need to make key. Just f...

Read MQB48 RH850 RF701401 Dash by VVDI Key Tool Plus

Another Xhorse RH850 adapter tutorial: how to read VAG MQB NEC35XX RH850 DF701401 dashboard with xhorse vvdi key tool plus and RH850 cable. Procedure: Select Immo Programming>>VW>>Select by Type>>MQB Immo System>>Dashboard-MQB48 (VDO/JCI-NEC35XX Locked)-> Read NEC35XX Chip>>Soldering>>R7F701401 Check wiring diagram Remove components and solder rh850 cable with cluster Connect rh850 cable with key tool plus Read and save immo data Select Get Immo data Upload rh850 DF702401 data save above to calculate immo data Then save immo data Now you can generate dealer key or learn key with the immo data www.vvdishop.com

How to Add Key 2019 VW POLO MQB49/5C by Xhorse VVDI Key Tool Plus

Today 2019 VW POLO MQB49/5C add key success. Used Xhorse vvdi key tool plus pad for the whole process. Add key mqb platform (Johnson cluster and new MQB49/5C type on key tool plus are online. Read data with pad, then sent it for online calculation (cost 1 token – must be charged before). You have to use a token to add a spare key from working key. After 3 minutes I got immo data file which automatically saved into the device. After that you make dealer key (used Xhorse proxy MQB style) and program to the car as usual. Test report from Mr. Hrdina.

Xhorse VVDI Key Tool Plus Pad

Search This Blog