Skip to main content

How to Add Honda WR-V ID47 Key with Xhorse Key Tool Plus via OBD

 Xhorse VVDI Key Tool Plus Pad supports to program a new Honda WR-V ID47 smart key by OBD success.

 

Following I’m gonna show the programming procedure:

Connect VVDI Key Tool Plus with OBD, put Honda Universal Remote Key into slot.

 

  1. Program Remote

Remote program >> Honda >> All remote >> Fit XRV 2013+ ID47 FSK 433 >> Generate

 

Writing data… wait until 100%

 

Burn success.

Honda WR-V ID47 Key with Xhorse Key Tool Plus 1

Honda WR-V ID47 Key with Xhorse Key Tool Plus 2

Honda WR-V ID47 Key with Xhorse Key Tool Plus 3

  1. Program IMMO

Immo programming >> Honda >> Select by type >> Immo system 3 >> Start programming >> Adds a key

 

Follow the prompts to operate:

Turn off ignition switch.

 

Insert the programmed working key, switch ignition on.

 

Turn off ignition switch.

Turn on the ignition switch.

If no response within 10s, please turn off/on the ignition switch again.

 

Turn off ignition switch.

Insert the new key and switch ignition on within 15s.

Honda WR-V ID47 Key with Xhorse Key Tool Plus 4

Honda WR-V ID47 Key with Xhorse Key Tool Plus 5

Honda WR-V ID47 Key with Xhorse Key Tool Plus 6

Honda WR-V ID47 Key with Xhorse Key Tool Plus 7

Honda WR-V ID47 Key with Xhorse Key Tool Plus 8

Turn off ignition switch.

Switch ignition on.

Turn off ignition switch.

Switch ignition on.

 

Whether IMMO indicator light is out? Yes

Turn off ignition switch.

Switch ignition on.

 

Operation completed, please check if the key function is normal.

Test the new key, it can start the engine, and its remote works well.

Done!

Honda WR-V ID47 Key with Xhorse Key Tool Plus 9

 

This is using VVDI Key Tool Plus Programmer to add a ID47 key for Honda WR-V via OBD.

https://www.vvdishop.com/

Comments

Popular posts from this blog

Where to Get VAG MQB Sync Data for VVDI Key Tool Plus?

  New user report: Made MQB Skoda Octavia 2018 all keys lost with xhorse tools. Tested  VVDI Prog  and  VVDI key tool plus  read MQB dashboard. Both devices have bought the new  VAG MQB license . Without you cannot read the data on dashboard. and you need internet connection when you start to read the dashboard. Because device confirm you have license before start the reading. There is a e-mail that responded fast and asked sync data for there 60$ cost and get data in less then 3min. email address:  sync_data_calcu@qq.com  I done already few with 100% success. Lifting pin not very dangerous. They answered fast usually I communicate via wechat and there have take time. Same place need to solder if use  key tool plus . But key tool plus does not need 1k oom and no extra 12v as vvdi prog. 2019 build year Skoda Superb akl situation made successfully today. same dashboard 160€ and they give you all data what need to make key. Just f...

Read MQB48 RH850 RF701401 Dash by VVDI Key Tool Plus

  Another   Xhorse RH850 adapter   tutorial: how to read VAG MQB NEC35XX RH850 DF701401 dashboard with   xhorse vvdi key tool plus   and RH850 cable. Procedure: Select Immo Programming>>VW>>Select by Type>>MQB Immo System>>Dashboard-MQB48 (VDO/JCI-NEC35XX Locked)-> Read NEC35XX Chip>>Soldering>>R7F701401 Check wiring diagram Remove components and solder  rh850 cable  with cluster Connect rh850 cable with key tool plus Read and save immo data Select  Get Immo data Upload rh850 DF702401 data save above to calculate immo data Then save immo data Now you can generate dealer key or learn key with the immo data   www.vvdishop.com

How to Add Key 2019 VW POLO MQB49/5C by Xhorse VVDI Key Tool Plus

  Today 2019 VW POLO MQB49/5C add key success. Used   Xhorse vvdi key tool plus pad   for the whole process. Add key mqb platform (Johnson cluster and new MQB49/5C type on key tool plus are online. Read data with pad, then sent it for online calculation (cost  1 token  – must be charged before). You have to use a token to add a spare key from working key. After 3 minutes I got immo data file which automatically saved into the device. After that you make dealer key (used  Xhorse proxy MQB  style) and program to the car as usual. Test report from Mr.  Hrdina.