Program Honda Accord 2014 All Keys Lost by VVDI Key Tool Plus Pad

This is a quick demonstration of how to use Xhorse VVDI Key Tool Plus Pad to program a key for Honda Accord year 2014 up when all key lost.

Prepare

Connect VVDI Key Tool Plus Pad to OBD2 port of Honda, and a smart key to be programmed.

Procedure

Immo programming >> Asia >> Honda >> Accord

Smart key system(2014-) >> Begin >> All smart keys are lost

Put the smart key to be programmed inside the car, press “OK”.

Input the number of keys to be registering(up to six), press “OK”.

Can it operate normally to turn on ignition switch? Press “No”.

Follow the prompts to operate:

Press STAR/STOP button of engine.

Whether the ignition switch is turned on? Press “Yes”.

Turn off ignition switch.

Switch ignition on.

Whether indicator light is out? Press “Yes”.

Turn off ignition switch again.

Switch ignition on.

Smart keys registration completed! Press “OK”.

Program success, press “Yes” to complete.

Let’s test the smart key finally, okay, it can start the engine normally, all works well.

VVDI Key Tool Plus Pad key programming for Honda Accord 2013 all key lost successfully.

https://www.vvdishop.com/

http://blog.vvdishop.com/vvdi-key-tool-plus-pad-program-honda-accord-2014-all-key-lost/

Comments

Where to Get VAG MQB Sync Data for VVDI Key Tool Plus?

New user report: Made MQB Skoda Octavia 2018 all keys lost with xhorse tools. Tested VVDI Prog and VVDI key tool plus read MQB dashboard. Both devices have bought the new VAG MQB license . Without you cannot read the data on dashboard. and you need internet connection when you start to read the dashboard. Because device confirm you have license before start the reading. There is a e-mail that responded fast and asked sync data for there 60$ cost and get data in less then 3min. email address: sync_data_calcu@qq.com I done already few with 100% success. Lifting pin not very dangerous. They answered fast usually I communicate via wechat and there have take time. Same place need to solder if use key tool plus . But key tool plus does not need 1k oom and no extra 12v as vvdi prog. 2019 build year Skoda Superb akl situation made successfully today. same dashboard 160€ and they give you all data what need to make key. Just f...

Read MQB48 RH850 RF701401 Dash by VVDI Key Tool Plus

Another Xhorse RH850 adapter tutorial: how to read VAG MQB NEC35XX RH850 DF701401 dashboard with xhorse vvdi key tool plus and RH850 cable. Procedure: Select Immo Programming>>VW>>Select by Type>>MQB Immo System>>Dashboard-MQB48 (VDO/JCI-NEC35XX Locked)-> Read NEC35XX Chip>>Soldering>>R7F701401 Check wiring diagram Remove components and solder rh850 cable with cluster Connect rh850 cable with key tool plus Read and save immo data Select Get Immo data Upload rh850 DF702401 data save above to calculate immo data Then save immo data Now you can generate dealer key or learn key with the immo data www.vvdishop.com

Will VVDI Key Tool Plus Program VAG MQB49 Key

How to program VAG MQB49 key with xhorse vvdi key tool plus ? This is a frequently asked question. Here’s the clue. Only Johnson Control instrument is supported by xhorse . Xhorse key tool plus or vvdi2 will only add key to MQB49 (still need sync data), they cannot do MQB49 all keys lost. 1. Calculate immo data online Try to read immo data with key tool plus, if failed to read immo data (shown as error image below). You need to obtain sync data from 3rd party. 2 Check immo status Display the number of vehicle keys, whether current key is locked and whether is dealer key and other information 3. Generate dealer key Load immo data file to generate dealer key, support generate normal dealer key and OME key (online) 4. Leanr key Learn the new generated key and original key into the car together, keys that are not learned will not be able to start the car. 5. Modify MQB49 key ID

Xhorse VVDI Key Tool Plus Pad

Search This Blog